No matter what your crushing, screening or feeding requirements, Jaques has the product.
Industry wide, Jaques products have a reputation for robust construction and superior performance, all based on 120 years experience. Jaques product range includes :
 |
 |
Feed Opening :
|
760 x 460 mm - 2130 x 1680 mm |
| Capacity : |
1300 TPH |
| Weight : |
14 - 270 Tonnes |
| Close Side Setting : |
50 - 300 mm |
| Power requirements : |
55 - 350 kw |
Heavy Duty Frames Fabricated from low carbon steel plate, reinforced with ribs thoughout.
|
| Optional mulitple piece frames, spigoted and joined to preserve the single frame design rigidity, while eliminating single piece cast frame weaknesses. |
| Optional hydraulic CSS adjusting mechanism |
|
Heavy Duty Self Aligning Double row roller bearings thoughout, sealed against dust intrusion. |
|
Maganese Steel two piece design fixed and moving jaw faces |
|
Rocking end toggles |
Also Available in Laboratory Crusher |
Heavy Duty Ribbed design swingstock and pitman |
 |
 |
Feed Opening :
|
510 x 360 mm - 1520 x 1270 mm |
| Capacity : |
1000 TPH |
| Weight : |
37 - 76 Tonnes |
| Close Side Setting : |
100 - 300 mm |
| Power Requirements : |
22 - 250 kw |
Heavy Duty Frames Fabricated from low carbon steel plate, reinforced with ribs thoughout, All mounting surfaces are fully machined for accuarte alignment of critical components.
|
| SKF Heavy Duty Self Aligning Double row roller bearings thoughout, sealed against dust intrusion. |
|
Main Bearing Housing are removable for maintenance |
|
Fixed and moving jaw faces are reversable top to bottom for maximum life. |
| |
Rocking end toggles |
Also Available in Laboratory Crusher |
Wide Selection of wear liner materials available |
 |
|
|
Feed Opening :
|
200 x 125 mm - 300 x 175 mm |
| Capacity : |
up to 4.2 TPH |
| Weight : |
340 - 1020 Kgs |
| Close Side Setting : |
3 - 25 mm |
| Power Requirements : |
1.1 - 5.5 kw |
Replaceable Maganses Steel side Liners protect
crusher side frames
|
| Heavy Duty Self Aligning Double row roller bearings thoughout. |
| Safety toggle prevents damage to mechanism should uncrushable materials enter the crushing chambers. |
| Toggle Block with setting for fine or coarse crushing. |
|
Balanced V Groove Flywheel. |
|
Vernier Setting Adjustment enables rapid, fine adjustments to be made. |
Roller Mill and Jaw Crusher Available |
Fabricated Mild steel Frame, fully Stress relieved. |
 |
 |
Feed Opening :
|
350 - 500 mm |
| Capacity : |
345 - 580 TPH |
| Weight : |
28 Tonnes |
| Close Side Setting : |
40 - 65 mm |
| Power Requirements : |
150 - 250 kw |
| Variable Stroke - choice of 5 Settings |
| Feed Opening remains practically constant for whole life of Mantle |
| Roller bearings fitted to Countershaft. |
| Spehrical Plain Spider Bearing eliminates plain |
| Cast Steel Top and Bottom Shells |
| Large feed Opening accepts the same feed size as larger cone crushers and reduces product size. |
|
Two Dust Sealing protection Systems as standard, Labyrinth and air. |
|
Simple Hydraulic Adjustment by raising or lowering the main shaft. |
 |
 |
Feed Opening :
|
50 - 450 mm |
| Capacity : |
up to 720 TPH |
| Weight : |
11 - 45 Tonnes |
| Close Side Setting : |
10 - 55 mm |
| Power Requirements : |
150 - 350 kw |
Low maintenance, heavy duty design provides a long trouble free life..
|
| Variable Stroke. |
| High speed and low power consumption due to roller bearings throughout |
| Automatic lubriction system with external air cooled unit. |
| Heat Treated and precision finished, hydraulic supported mainshaft. |
|
Maimised potential capacity due to hydraulic control of close side setting and optional automation package. |
|
Steep angle crushing chamber results in well shaped, uniform product. |
| |
All Components are accessible from the top (except for Hydraulics) |
| Cartridge type countershaft assembly is removable without dismantling the crusher. |
| Tramp Iron relief through accumulator and relief valve. |
 |
 |
Width :
|
From 600 mm |
Length :
|
to suit application |
| Capacity : |
to 12,000 TPH |
| Weight : |
Up to 125 tonnes |
| Operating Angle : |
0 - 26 Deg (Up) |
| Drive : |
Variable Speed / Electro-Mechanical & Hydraulic drive Systems. |
Heavy Duty Construction with large diamter Head & Tailshafs.
|
| Sealed type crawler tractor carrying chain with induction hardned pins, case hardned bushes and forged chain links with induction hardened rail surfaces. |
| Oil filled, sealed for Life crawler tractor carying rollers at close spacing. |
|
Head and Tail Shaft Spherical Roller bearings sealed against ingress of dust and dirt. |
|
Headshaft sprocket assembly design enables bolt-in sprocket segments to be replaced and reversed without dismantling the feeder. |
| |
Odd No of sprocket teeth to minimise the wear between teeth and chain contact. |
| |
Heavy duty, ribbed, overlapping Maganese stell Pans with machined contact surfaces for attachement to the chains. |
| Hydraulic Chain tension as Standard. |
| Proven Design based on standard crawler components. |
 |
 |
Width :
|
1140 - 1650 mm |
Length :
|
4500 - 6500 mm |
| Capacity : |
up to 2,000 TPH |
| Weight : |
5 - 11 tonnes |
| Operating Angle : |
0 - 10 Deg (Down) |
| Drive : |
Variable Speed Unbalanced Motors or Exciters. |
Heavy Duty Construction with Beam support pan.
|
| Excellent access to exciter drive arrangement allows quick and easy changeover and maintenance. |
| High capacities achievabledue to large stoke |
|
Direct coupling of exciter to a drive via "Cardan Shaft". |
Download Brochure... |
feeder can be supported, suspended or a combination of both. |
| |
Wide Selection of Wear liner materials available. |
| |
Variable Speed Drive Optional. |
 |
 |
Width :
|
1350 - 2100 mm |
Length :
|
2500 - 6000 mm |
| Capacity : |
up to 2,500 TPH |
| Weight: |
13 - 18 tonnes |
| Operating Angle : |
5 - 15 Deg (Down) |
| Drive : |
Mechanical Exciter |
Stepped Grizzly section.
|
| Modular grizzly bar sections. |
| Rubberrised impact area. |
|
Tapered grizzly bars to reduce pegging. |
Download Brochure... |
Supported on rubber buffers. |
| |
Exciter drive. |
| |
Direct Coupling via a cardan shaft. |
 |
 |
Width :
|
600 - 3500 mm |
Length :
|
1000 - 6000 mm |
| Capacity : |
up to 2,000 TPH |
| Weight : |
1 - 20 Tonnes |
Operating Angle :
|
0 - 5 Deg (Down) |
| Drive : |
Hydraulic Drives. |
Fabricated rolled steel section frame incorporating drive unit supports.
|
| Pan and Hydraulic cylinder equipment. |
| Reciprocating Pan Assembly on Selaed for Life crawler tractor rollers. |
|
Optional Safety Gate. |
|
Heavy Duty Construction. |
| |
|
 |
|
Width :
|
750 - 2000 mm |
Length :
|
3,500 - 18,000 mm |
| Capacity : |
up to 3,500 TPH |
| Weight : |
1 - 20 Tonnes |
Operating Angle :
|
0 - 15 deg (up) |
| Drive : |
Hydraulic Drives or Electromechanical. |
| Designed for minimum maintenance and long term operation. |
| Both primary and secondary applications. |
| Comprehensive Design Support and interaction with the client. |
| Innovative Maintenance Features. |
Click here for More Information.. |
Heavy Duty Mechanical design to Australian and International Standards. |
Download Brochure... |
Integrated Guading System to Australian Standards. |
| |
Integrated hydraulic take-up system. |
 |
 |
Width :
|
800 - 1200 mm |
Length :
|
2500 - 4000 mm |
| Capacity : |
up to 1,000 TPH |
| Weight : |
Tonnes |
Operating Angle :
|
0 - 10 Deg (Down) |
| Drive : |
Variable Speed Unbalanced Motors |
Heavy Duty Construction with stiffening throughout
|
| Excellent access to drive arrangement for maintenance purposes. |
| High capacities achievable due to large stroke |
|
Feeder can be supported or suspended or both. |
Download Brochure... |
Heavy Duty Construction.Variable Speed using AC Frequency Inverter. |
 |
 |
Types :
|
Shoe & Anvil, Rock on Anvil,
Rock on Rock |
Max Feed Size :
|
38 to 305 mm |
| Capacity : |
70 to 1,000 TPH |
| Power : |
37 to 900 kw |
| Low Cost , High Output |
| Heavy Duty Bearing Pedestal |
Externally adjutable Feed tube System
|
| Heavy Duty Open shoe Table |
| Patented vaulted anvil system |
|
Astralloy Main shaft |
|
Modular Oil system |
| |
Open lid safety Lock |
 |
 |
Size :
|
3000 x 1200 - 7315 x 2430 |
Decks :
|
single, double and triple |
| Weight : |
1.5 - 15 Tonnes |
| Power : |
5.5 to 45 kw |
| The Mechanism is Located to ensure a consistent circular motion. |
| Amplitude of vibration can be varied via adjusting the counterweight. |
Spring Controlled centrifugal counterweight assemblies prevent resonance during starting and stopping and reduces starting torque to a minimum.
|
| A replaceleable steel cover protects the housing tube from wear. |
| The side plates Screen body has vertical stiffening angles on teh side plates for rigidity, strength and long life, without excessive weight. |
|
Normally mounted at 20 Deg, but may be varied to suit. |
|
Discharge Spouts Standard. |
|
 |
 |
Size :
|
1850 x 900 - 3000 x 1500 |
Decks :
|
single, double and triple |
| Weight : |
0.6 - 1.4 Tonnes |
| Power : |
4 to 5.5 kw |
| Mechanism ensures consistent circular motion. |
| Adjustable amplitude + vibration via counterweight adjustment |
| Spring Controlled centrifugal counterweight assemblies prevent resonance during starting and stopping and reduces starting torque to a minimum. |
| A replaceable steel cover protects the housing tube from wear. |
| Vertical stiffening screen body side plates for rigidity and long life wear while reducing weight |
|
20 degree mounting, but may be varied to suit. |
|
Discharge Spouts Standard. |
| |
High or Low back plates can be fitted to suit application. |
|
|
 |
|
Terex Lifting Australia P/L trading as Terex Jaques. ABN 86 010 671 048
Terex Building, 187 Osborne Avenue off Clayton Road, Clayton South, 3169, Victoria, Australia
Telephone: +61 3 8551 9300 FAX: +61 3 8551 9310 |
|
